Getting Started

This guide will run you through getting your controller and first sounder setup.

Some Assumptions:

• You have a Raspberry Pi running Raspbian Lite.
• You have a server (or pi) with Docker and Docker Compose installed.

Controller

1. On your server (or the same pi with docker installed) run through the Controller Installation.
2. Change your password from the Settings link on the menu.
3. Open Zones and Add a zone.
4. Open Sounders and Add a new sounder. Details of the options can be found in the sounder configuration.
5. On your new sounder add it to your new zone.

You are now ready to install the sounder and enroll it.

Adding a Sounder

On the sounder Pi run through the Sounder Installation. The enroll command can be found on the sounders page.

Creating Your Schedule